Filter
Top Products
CGI Command Manual
54
JpTargetRatio "5"to"60" camera camera.cgi 1.00
Compression ratio is set with 1/"n".
Setting Command invalid when "jpeg" isn't specified in ImageCodec.
JpBandwidth "0.0"/"0.5"to"15.0" camera camera.cgi 1.00
Band limitation for JPEG streaming.
Setting Command and Inquiry Command are invalid when "jpeg" isn't
specified in ImageCodec.
FrameRate<codec>
"1"/"2"/"3"/"4"/"5"/"6"/"8"/"10"/"12"/
"15"/"16"/"20"/"25"/"30"
camera camera.cgi 1.12
The frame rate which can be set up by the model is different. Refer to
Appendix.
BitRate<codec>
"64"/"128"/"256"/"384"/"512"/
"768"/"1024"/"1536"/"2048"/"3072"/
"4096"/"5120"/"6144"/"7168"/"8192"
camera camera.cgi 1.00
IFrameInterval<codec> "0"to"5" camera camera.cgi 1.00
IFrameRatio<codec> "1"to"150" camera camera.cgi 1.00 This setup is effective when the value of IFrameInterval<codec> is "0".
AutoRateCtrl<codec> "on"/"off" camera camera.cgi 1.00
InsertIFrame<codec> "on" - camera.cgi 1.00
Quality<codec> "0"to"10" camera camera.cgi 1.00
TargetRatio<codec> "5"to"60" camera camera.cgi 1.00
BandWidth<codec> "0.0"to"15.0" camera camera.cgi 1.00 Limitation of the bandwidth of streaming.
ImageMaxSize <Horizontal>,<Vertical> camera - 1.00 Refer to Appendix.
VidCapSize "<Horizontal>,<Vertical>" camera camera.cgi 1.00
Maximum image size or Aspect ratio is changed. When this value is
changed, a camera restarts, and some of the setups are returned for a
setup of factory default. Refer to Appendix.
JpMode "00000000" to "FFFFFFFF" camera - 1.00
M4Mode "00000000" to "FFFFFFFF" camera - 1.00
RtpExpire "1000"to"86400000" camera camera.cgi 1.00
It is the set up of the time-out time of RTP. See chapter "2.1 Acquiring
MPEG-4 or H.264 bit stream".