Filter
Top Products
CGI Command Manual
55
Color "color"/"black" camera camera.cgi 1.00 Select color video or monochrome video.
ZoomMode "full"/"optical" camera camera.cgi 1.00
Zoom range configuration.
full: optical and digital zoom area
optical: optical zoom area only
FocusMode "auto"/"manual" camera camera.cgi 1.00 Focus function configuration.
VideoStd "ntsc"/"pal" camera camera.cgi 1.00
A setup and inquiry can be done in SNC-RH124/164. This command
changes NTSC/PAL of the analog output. When this setup is changed, a
shutter speed and a frame rate sometimes change.
Only inquiry is possible in the model except for SNC-RH124/164.
LineLock "on"/"off" camera camera.cgi 1.00 Enable or disable of Line lock function.
LineLockVPhase "0" to "XXX" camera camera.cgi 1.00
Phase of Line lock function.
NTSC: 0 - 524
PAL: 0 - 624
WBMode
"auto"/"indoor"/"outdoor"/"atw"/"atw
pro"/"fluorescent"/"mercurylamp"/"s
odiumlamp"/"metalhalide"/"whiteled
"/"onepushwb"/"manual"
camera camera.cgi 1.00
Select white balance mode. Refer to Appendix.
OnePushTrg "trgon" - camera.cgi 1.00
This parameter affects the camera when WBMode is set to
"onepushwb".
RGain "00" to "FF" camera camera.cgi 1.00 This parameter affects the camera when WBMode is set to "manual".
BGain "00" to "FF" camera camera.cgi 1.00 This command affects the camera when WBMode is set to "manual".
HighResoRGain "000" to "fff" camera camera.cgi 1.00 This parameter affects the camera when WBMode is set to "manual".
HighResoBGain "000" to "fff" camera camera.cgi 1.00 This command affects the camera when WBMode is set to "manual".
ExpMode
SNC-RH124/164,
SNC-RS44/46/84/86：
camera camera.cgi 1.00