Filter
Top Products
CGI Command Manual
52
McTtl "1"to"255" camera camera.cgi 1.00 Set TTL value on the multicast packet.
UcVideoPort "1024"to"65534" camera camera.cgi 1.00
Set the port number from which MPEG-4 or H.264 sends in unicast
streaming.
UcVideoPort<codec> "1024"to"65534" camera camera.cgi 1.00
Set the port number from which Image codec sends in unicast
streaming.
UcAudioPort "1024"to"65534" camera camera.cgi 1.00 Set the port number from which Audio sends in unicast streaming.
RTSPMcAddress "<ip addr>" camera camera.cgi 1.26 Set multicast address of RTSP.
RTSPMcVideoPort<codec> "1024"to"65534" camera camera.cgi 1.26
Set the port number from which Image codec sends in multicast
streaming of RTSP.
RTSPMcAudioPort "1024"to"65534" camera camera.cgi 1.26
Set the port number from which Audio sends in multicast streaming of
RTSP. SNT-EX154 can be used only with CH1.
RTSPUcVideoPort<codec> "1024"to"65534" camera camera.cgi 1.26
Set the port number from which Image codec sends in unicast streaming
of RTSP.
RTSPUcAudioPort "1024"to"65534" camera camera.cgi 1.26
Set the port number from which Audio sends in unicast streaming of
RTSP. SNT-EX154 can be used only with CH1.
McVideoAutomode<codec> "on"/"off" camera camera.cgi 1.26 Set the automatic multicast streaming of the video. Default value is off.
McAudioAutomode "on"/"off" camera camera.cgi 1.26
Set the automatic multicast streaming of the Audio. Default value is
invalid. SNT-EX154 can be used only with CH1.
RTSPPort "554/"1024"to"65535" camera camera.cgi 1.00
It uses by the RTSP transmission. A port number is set up. Default is
554. A RTSP server restarts when a setup is changed.
RTSPTimeout "0" to "600" camera camera.cgi 1.04
It uses by the RTSP transmission. This value is used for RTSP session
Keep Alive. Default is 0. When set to 0, RTSP session will not be
disconnected even if it does not receive the Keep Alive commands.
RTPMJPEGExtnHeader "on"/"off" camera camera.cgi 1.00
The matter whether JPEG over RTP and RTP Extension Header are
developed is set up. Initial value is "off". When this command is taken, a