Filter
Top Products
CGI Command Manual
23
03 around 20%
04 around 25%
05 around 30%
06 around 40%
07 around 50%
08 around 66.7%
09 around 83.3%
10 around 100%
<Example>
move right with 30% on VGA.
POST /command/ptzf.cgi HTTP/1.1¥r¥n
Host: 192.168.1.1¥r¥n
Connection: Keep-Alive¥r¥n
Cache-Control: no-cache¥r¥n
Content-Length: 13¥r¥n
¥r¥n
relative=0605
<Response>
HTTP/1.1 204 No Content¥r¥n
Content-Length: 0¥r¥n
Server: XXXX/X.XX¥r¥n
¥r¥n
8.2 AbsolutePanTilt parameter
A position of pan and tilt is specified in the absolute value. The upper right of the screen is a positive
direction. Refer to "12.14 PanTilter" for the coordinate of the PTZ camera.
The bottom right of the screen was a positive direction with a SolidPTZ function before the firmware Ver.
1.30. Set up the CGI command of SolidPTZTiltDirection in "down" after the firmware Ver. 1.30 when you
move the bottom right of the screen to the positive direction.