Filter
Top Products
CGI Command Manual
69
DomainSuffix "<domain suffix>" network network.cgi 1.00 Set domain suffix.
HttpPort "80"/"1024"to"65535" network network.cgi 1.00 Set http port.
Mtu "1000" to"1500" network network.cgi 1.00
Ipv6Flg "on"/"off" network network.cgi 1.00 It makes IPv6 effective.
AutoIpv6 "on"/"off" network network.cgi 1.00
Dnsv6Auto "on"/"off" network network.cgi 1.00
Ipv6 "<ip addr>" (char [40]) network network.cgi 1.00
Prefix "0"to"128" network network.cgi 1.00
Gatewayv6 "<ip addr>" (char[40]) network network.cgi 1.00
PrimaryDnsv6 "<ip addr>" (char[40]) network network.cgi 1.00
SecondaryDnsv6 "<ip addr>" (char[40]) network network.cgi 1.00
Ipv6Mtu "1280" to"1500" network network.cgi 1.00
BruteForceAttack "0" or "30" to "86400" network network.cgi 1.10
A Brute Force Attack function is set up.
0: Disable
30 - 86400: Reject period (sec)
ArppingFunc "on"/"off" network network.cgi 1.2
An Arpping function is set up. A setup becomes effective after the
restart.
The command which can't be used in each model is shown in the following table.
Model name Unsupported command (Network)
SNT-EP104 PhyMdiStat
SNT-EP154 PhyMdiStat
SNT-EX104 PhyMdiStat
SNT-EX154 PhyMdiStat
CH2/3/4 of SNT-EX104/154 and SNT-EP104/154 doesn't support the following CGI commands.
♦ PhySpeed, PhyDuplex, PhyAutonego, PhyMdi