Filter
Top Products
CGI Command Manual
75
11.15 SSL / TLS
Parameter Value InqParm SetCGI Ver Note
SSLMode
"Plain" / "SSL" / "Plain-SSL" /
"SSL-Plain"
network network.cgi 1.00
SSLProtocol
"SSLv23" / "SSLv3" / "TLSv1" or
"TLSv10"
network network.cgi 1.00
SSLSessionKeyChange "on" / "off" network network.cgi 1.00
on : SSL session key is regularly changed.
off : SSL session key is not regularly changed.
SSLKeyChangeInterval "60" - "3600" network network.cgi 1.00
It is possible to use this parameter, when "SSLSessionKeyChange" is
on. This parameter is for exchanging interval of SSL session key.
HttpsPort 443 or (1024 - 65535) network network.cgi 1.00
SSLCertMode "pki"/"normal"/"auto" network network.cgi 1.00
"auto" uses the self-signature certificate formed inside. And, "pki"
works by the self-signature certificate mode, too. When it is set up in
"pki", "auto" is returned to the setup information inquiry.
SSLPrivPassword
set: <base64 encoded string>
inq : "**********"
network network.cgi 1.00 0 to 50 characters.
SSLCertInstalled "0"/"1" network - 1.00
0 : The certificate is preserved.
1 : The certificate is not preserved.
SSLCertIssuerDn <issuer domain name string> network - 1.00
SSLCertSubjectDn <subject domain name string> network - 1.00
SSLCertExtendedKeyUsage <extended key usage string> network - 1.00
SSLCertValidity <YYYY-MM-DD> network - 1.00
SSLCertAvailability "0"/"1" network - 1.00
SSLCACertInstalled "0"/"1" network - 1.00
SSLCACert<n>IssuerDn <issuer domain name string> network - 1.00