Filter
Top Products
CGI Command Manual
110
When the setting is restored, all-configuration.cgi or all-configuration-preset.cgi is used.
11.35 Trigger
Parameter Value InqParm SetCGI Ver Note
Trigger "ftp" - main.cgi 1.00
Trigger "ftp-alarmbuffer" - main.cgi 1.00 Valid only when "FcAlmFunc", "FcAlmBuffer" and "FcManualFunc" are "on".
Trigger "smtp" - main.cgi 1.00
Trigger "memory" - main.cgi 1.00
Trigger "memory-alarmbuffer" - main.cgi 1.00 Valid only when "ImAlmFunc", "ImAlmBuffer" and "ImManualFunc" are "on".
Trigger "alarmout<AO>" - main.cgi 1.00 Toggle
Trigger "alarmout<AO>on" - main.cgi 1.00
Trigger "alarmout<AO>off" - main.cgi 1.00
Trigger "daynight" - main.cgi 1.00 Toggle
Trigger "daynighton" - main.cgi 1.00
Trigger "daynightoff" - main.cgi 1.00
Trigger "voicealert<n>" - main.cgi 1.00 <n> is the integer of 1 - 3.
Trigger "voicealert<n>-test" - main.cgi 1.00 For test play (no repeat). <n> is the integer of 1 - 3.
The command which can't be used in each model is shown in the following table.
Model name Unsupported commands (Trigger)
SNC-CH110 alarmout<AO>, alarmout<AO>off, alarmout<AO>on, daynight, daynightoff, daynighton, ftp-alarmbuffer, memory, memory-alarmbuffer, voicealert<n>,
voicealert<n>-test
SNC-CH120 ftp-alarmbuffer, memory, memory-alarmbuffer, voicealert<n>, voicealert<n>-test
SNC-CH160 ftp-alarmbuffer, memory, memory-alarmbuffer, voicealert<n>, voicealert<n>-test
SNC-CH210 alarmout<AO>, alarmout<AO>off, alarmout<AO>on, daynight, daynightoff, daynighton, ftp-alarmbuffer, memory, memory-alarmbuffer, voicealert<n>,