Filter
Top Products
Scan Using the Control Panel
134
6
b Click the Scan to Net Settings button. The Web Based Management window will appear.
c Select the device (Network Device 1 or Network Device 2) to which you want to assign the Scan to PC
feature.
NOTE
The Network Device 1 settings will be applied to on the Control Panel of the machine.
The Network Device 2 settings will be applied to on the Control Panel of the machine.
d Select Scan to PC(Net Connect-XXXXXX) (XXXXXX is a scan type) from the Type drop-down list for
the selected device in c.
e Select the destination computer from the Destination drop-down list for the selected device in c.
f Click Submit.
g Configure the settings if needed (see Change Scan to PC Settings (Windows
®
) on page 151 or Change
Scan to PC Settings (Macintosh) on page 157).
h Load your document.
i Press your configured key and then . The machine starts scanning.