Brother ADS-1000W Photo Scanner User Manual


 
Appendix
230
B
File Name
Cannot Be
Used (Scan to
USB)
The maximum sequential
number for the file name has
been reached. Press ,
delete unused files from the
USB flash drive and then try
again.
Unusable
Device (Scan to
USB)
An unsupported USB device is
inserted in the USB Direct
Interface. Remove the
unsupported USB device,
such as a mouse, from the
USB Direct Interface.
Unusable USB
Device (Scan to
USB)
An unusable device is inserted
in the USB port. Disconnect
the device, turn the machine
off and then on.
USB Hub Not
Supported
(Scan to USB)
A hub or USB flash drive with
a hub is inserted in the USB
Direct Interface. Remove the
unsupported device, such as a
USB hub or USB flash drive
with a hub, from the USB
Direct Interface.
Authenticate
Error (Scan to
FTP)
A server authentication error
occurred because the FTP
user name and password you
entered are incorrect or not
configured correctly. Confirm
that the user name and
password are configured or
entered correctly and then try
again.
Server Time
Out (Scan to
FTP)
Check the following and then
try again.
The network settings are
correct.
Your wireless access
point/router is turned on.
The remote FTP server is
turned on.
The name (or IP address)
of the FTP remote server is
correct.
Status Descriptions