Brother ADS-1000W Photo Scanner User Manual


 
Routine Maintenance
179
8
j Slide the Pick-up Roller (1) to the left edge while turning the Pick-up Roller.
k Close the Pick-up Roller Cover.
l Close the Front Cover and the Top Cover.
NOTE
In addition to cleaning the glass strips with a soft lint-free cloth moistened with water, run your fingertip
over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again
concentrating on that area. You may need to repeat the cleaning process three or four times. To test, scan
a document after each cleaning attempt.
When there is a spot of dirt or
correction fluid on the glass
strip the scanned sample
shows a vertical line.
After the glass strip is cleaned
the vertical line is gone.
1