Filter
Top Products
3-65
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
ROMPaq
Using flash ROM in Compaq servers allows the firmware (BIOS) to be upgraded with system or
option ROMPaq utilities. To upgrade the ROM:
■ Run the ROMPaq utility from the system partition, or
■ Insert a ROMPaq diskette into drive A and cold boot the system.
The ROMPaq utility then checks the system and provides a choice (if more than one exists) of
ROM revisions to which the system can be upgraded. This procedure is the same for both system
and option ROMPaq utilities.
CAUTION: Do not turn the power off during a firmware upgrade. A loss of power
during upgrade may corrupt the firmware and prevent the system from booting.
Compaq Insight Manager
Compaq Insight Manager is the Compaq application for easily managing network devices.
Compaq Insight Manager delivers intelligent monitoring and alerting as well as visual control of
your servers.
Features of Compaq Insight Management
Compaq Insight Management features include:
■ Comprehensive Fault Management - For all major subsystems, including pre-failure
alerting for disks, memory, Pentium Pro, and Pentium II processors.
■ Integration Management - In conjunction with SmartStart, allows you to effectively
deploy and manage configurations throughout the enterprise using the Integration Server
and Insight Version Control.
■ Performance Management - Sets performance and capacity thresholds for management
variables related to CPU and bus utilization, NIC throughput, logical disk capacity,
and more.
■ Workstation Management - Monitors and manages Compaq Professional Workstations.
■ Client Management - Manages faults and assets on Compaq Deskpro computers.
■ Netelligent Management - Receives alarms from Netelligent devices. Full management of
Netelligent devices is supported through integration with Compaq Netelligent
Management Software.