2-43
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
External Replacement Battery
The external replacement battery is installed if the permanent lithium battery fails.
To install the external replacement battery:
WARNING: This server contains an internal Lithium Manganese Dioxide, or a
Vanadium Pentoxide, or an alkaline battery pack. There is risk of fire and burns if
the battery pack is not handled properly. To reduce the risk of personal injury:
n
Do not attempt to recharge the battery.
n
Do not expose to temperatures higher than 60°C.
n
Do not disassemble, crush, puncture, short external contacts, or dispose of in
fire or water.
n
Replace only with the Compaq spare designated for this product.
CAUTION: Batteries, battery packs, and accumulators should not be
disposed of together with the general household waste. In order to
forward them to recycling or proper disposal, please use the public
collection system or return them to Compaq, your authorized Compaq
Partners, or their agents.
CAUTION: Do not remove the lithium battery from the system I/O board or
permanent damage may occur. If the battery fails, install an external replacement
battery.
1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2. Remove the top access panel. See “Top Access Panel” earlier in this chapter.