Filter
Top Products
4-3
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
Switches
This section contains information concerning all internal switches on ProLiant 3000 Servers.
Configuration Switch Settings
Figure 4-3 shows the system I/O board configuration switch location and default setting for
ProLiant 3000 Servers. Table 4-3 gives the system I/O board configuration switch settings.
123456
Figure 4-3. System I/O board configuration switch location and default setting
Table 4-3
System I/O Board Configuration Switch Settings
Switch Function ON OFF
1 Video Integrated video is disabled.
Default.
Integrated video is enabled.
2 Lock Configuration Configuration cannot be changed.
Default.
Configuration can be changed.
3 Rack-to-Tower Conversion Rack-mount configuration. Tower configuration.
4 Diskette Boot Feature Diskette is enabled for booting,
regardless of configuration.
Default.
Diskette boot can be disabled
through System Configuration Utility.
5 Power-on Password Power-on password is defeated.
Default.
Power-on password is available.
6 Maintenance NVRAM is invalidated; configuration
is lost.
Default.
NVRAM is validated; configuration
is not lost.