Filter
Top Products
I
nde
x
-8
error Continued
Drive Monitoring features are unobtainable,
description 3-40
Drive Monitoring is NOT enabled for drive bay
X, description 3-40
Drive time-out occurred on physical drive bay X,
description 3-40
Drive X indicates position Y, description 3-41
Duplicate write memory error, description 3-42
Error Detected On Boot Up 3-60
Error occurred reading RIS copy from drive (bay)
X, description 3-42
FYI
Drive (bay) X is non-Compaq supplied,
description 3-42
Identify controller data did not match with
NVRAM, description 3-42
Identify logical drive data did not match with
NVRAM, description 3-42
Insufficient adapter resources, description 3-42
Logical drive X failed due to cache error,
description 3-43
Logical Drive X status = FAILED, description
3-43
Logical Drive X status = INTERIM
RECOVERY, description 3-43
Logical Drive X status = LOOSE CABLE
DETECTED, description 3-43
Logical Drive X status = NEEDS RECOVER,
description 3-43
Logical Drive X status = OVERHEATED,
description 3-43
Logical Drive X status = OVERHEATING,
description 3-43
Logical Drive X status = RECOVERING,
description 3-43
Logical Drive X status = WRONG DRIVE
REPLACED, description 3-44
Loose cable detected - logical drives may be
marked FAILED until corrected, description
3-44
Mirror data miscompare, description 3-44
Mirrored memory location errors, description
3-44
NMI - Automatic Server Recovery Timer
Expiration 3-61
NMI - Expansion Board Error 3-61
NMI - Expansion Bus Master Time-Out 3-61
NMI - Expansion Bus Slave Time-Out 3-61
NMI - Fail-Safe Timer Expiration 3-61
NMI - PCI Bus Parity Error 3-61
error
Continued
NMI - Processor Parity Error 3-61
NMI - Software Generated Interrupt Detected
Error 3-61
No configuration for Accelerator Board,
description 3-44
NVRAM configuration present, controller not
detected, description 3-38
Processor Exception 3-61
Processor Prefailure 3-60
Required System Fan Failure 3-61
SCSI port X, drive ID Y firmware needs
upgrading, description 3-44
Server Manager Failure 3-61
Set configuration command issued, description
3-44
Soft Firmware Upgrade required, description
3-44
Threshold for drive (bay) X violated, description
3-44
Threshold violations for drive (bay) X,
description 3-45
Unknown disable code, description 3-45
UPS A/C Line Failure Shutdown or Battery Low
3-61
WARNING - Drive Write Cache is enabled on X,
description 3-45
Warning bit detected, description 3-45
Wrong Accelerator, description 3-45
error codes See test error codes
event format 3-48
event messages 3-48
events list See also IMD
defined 3-48
exploded view
chassis components 1-1
system components 1-2
external battery
installing replacement 2-43
installing replacement, illustrated 2-44
jumper location 4-6
jumper location, illustrated 4-6
part number 1-3
F
fan baffle
part number 1-4
removing 2-17
removing, illustrated 2-17
replacing 2-17