vii
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
About This Guide
This Maintenance and Service Guide is a troubleshooting guide that can be used for reference
when servicing Compaq ProLiant 3000 Servers.
WARNING: To reduce the risk of personal injury from electrical shock and
hazardous energy levels, only authorized service technicians should attempt to
repair this equipment. Improper repairs could create conditions that are
hazardous.
IMPORTANT: The installation of options and servicing of this product shall be performed
by individuals who are knowledgeable of the procedures, precautions, and hazards
associated with equipment containing hazardous energy circuits.
Symbols in Text
These symbols may be found in the text of this guide. They have the following meanings:
WARNING: Indicates that failure to follow directions in the warning could result
in bodily harm or loss of life.
CAUTION: Indicates that failure to follow directions could result in damage to
equipment or loss of information.
IMPORTANT: Presents clarifying information or specific instructions.
NOTE: Presents commentary, sidelights, or interesting points of information.
Compaq Technician Notes
CAUTION: Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the component level or
to make modifications to any printed wiring board. Improper repairs can create a
safety hazard.
CAUTION: To properly ventilate your system, you must provide at least 12
inches (30.5 cm) of clearance at the front and back of the computer.
CAUTION: The computer is designed to be electrically grounded. To ensure
proper operation, plug the AC power cord into a properly grounded AC outlet only.