Filter
Top Products
3-29
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
NetFlex-2 Controller Test Error Codes
The 6000 series of Diagnostic error codes identifies failures with 32-bit DualSpeed NetFlex-2
and NetFlex-2 Token Ring Controllers.
Table 3-14
NetFlex-2 Controller Test Error Codes
Error Code Description Recommended Action
6000-xx
6001-xx
6002-xx
6014-xx
6016-xx
6028-xx
6029-xx
6089-xx
Network card ID failed.
Network card setup failed.
Network card transmit failed.
Network card Configuration failed.
Network card Reset failed.
Network card Internal failed.
Network card External failed.
Network card Open failed.
1. Check the controller installation in the EISA
slot.
2. Check the interrupt type and number setting.
3. Check the media connection at the controller
and Multistation Access Unit (MAU).
4. Check the media speed (4/16 ) and type
Unshielded Twisted Pair/Shielded Twisted
Pair (UTP/STP) settings.
5. Check the MAU, cabling, or other network
components.
6. Replace the controller.