Filter
Top Products
Safety precautions
The following precautions ensure the proper use of the printer and prevent the printer from being
damaged. Follow these precautions at all times.
●
Use the power supply voltage specified on the nameplate. Avoid overloading the printer's electrical
outlet with multiple devices.
●
Ensure the printer is well-grounded. Failure to ground the printer may result in electrical shock,
fireand susceptibility to electromagnetic interference.
●
Do not disassemble or repair the printer yourself. Contact your local HP Service Representative
for service, see
Contact HP Support on page 154.
●
Use only the electrical cord supplied by HP with the printer. Do not damage, cut or repair the power
cord. A damaged power cord has risk of fire and electric shock. Replace a damaged power cord
with an HP-approved power cord.
●
Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of
the printer. Doing so may cause fire, electric shock or other serious hazards.
●
Power off the printer and unplug the power cable from the power outlet in any of the following cases:
◦
When placing your hands inside the printer
◦
If there is smoke or an unusual smell coming from the printer
◦
If the printer is making an unusual noise not heard during normal operation
◦
A piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal
parts of the printer
◦
During a thunderstorm
◦
During a power failure
HP Start-Up Kit
The HP Start-Up Kit is the CD that comes with your printer; it contains the printer's software.
Your printer's documentation
You can read about how to use your printer in Using your printer and the Quick reference guide. The
most complete source of information is Using your printer, which is available from http://www.hp.com/
go/z3200/manuals/. The Quick reference guide contains the most commonly-needed information, and
is provided as a printed manual with your printer.
Using this guide
Using your printer is organized into the following chapters.
Introduction
This chapter provides a brief introduction to the printer and its documentation for new users.
2 Chapter 1 Introduction ENWW
Introduction