Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
10
Basic shooting operations
Preparing to shoot
1 Set the POWER/MODE switch to ON.
(Page25ofVol.1)
2 Push the OPEN lever of the P2 card slot
cover downward () and slide to open ().
3 Insert the P2 card securely in the card slot.
4 Raise the P2 card eject button to the
direction of the arrow, and close the P2
card/SD memory card slot cover.
•
Therearetwocardslots.
•
Beabsolutelysuretoclosethecardslot
coverstokeepthedustout.
•
DonotremovetheP2cardwhiletheP2card
accesslampsareblinkingorange.(Page12)
3
4
1
Lock release button
POWER/MODE
switch
Shooting in auto mode
1 Set the POWER/MODE switch to ON.
(Page25ofVol.1)
•
Checkthatthemodelamp(CAMERA)is
lightedred.
2 Switch the AUTO/MANUAL switch to AUTO
to select auto mode.
•
“
A
”appearsontheviewnderandLCD
screens.
•
Thefocus,gain,irisandwhitebalanceare
adjustedautomatically.
3 Press the START/STOP button (Red) on the
POWER/MODE switch to start shooting.
•
Pressagaintoreturntothecamera-recorder
totheshootingstandbymode.
•
UsethehandleSTART/STOPbuttontomake
iteasiertoshootfromlowangles.
•
Topreventaccidentaloperation,thehandle
sideSTART/STOPbuttonincludesahold
mechanism.
1
3
AUTO
MANUAL
2
Mode lamp
(CAMERA)
AUTO/MANUAL
switch
START/STOP
button
(handle side)
POWER/MODE
switch
Lock release button
 previous next