Panasonic AG-HPX250EN Camcorder User Manual


 
92
Formatting SD memory cards
SDmemorycardscanalsobeformattedfrom
thethumbnailscreen.WithanSDmemorycard
insertedintothecamera-recorder,performthe
followingoperation:
1 Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
ThethumbnailscreenappearsontheLCD
monitor.
2 Press the MENU button and select
OPERATION → FORMAT from thethumbnail
menu.
•
Thefollowingscreenappears.SelectSD
CARDandpresstheSETbuttononthe
Operationlever.
•
SelectEXITifformattingisnotrequired.
3 The following screen appears. Use the
Operation lever to select YES.
TheSDmemorycardisformatted.
SD memory cards can also be formatted
from the menu screen. (Page 150)
Check that no important data remains on a
card before formatting since data erased by
formatting cannot be recovered.
Setting the thumbnail display mode
Thethumbnaildisplaymodecanbecustomisedto
suityourpreferences.
1 Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
ThethumbnailscreenappearsontheLCD
monitor.
2 Press the MENU button and select
THUMBNAIL → SETUP from thethumbnail
menu.
Thefollowingscreenappears.
INDICATOR:
Selectwhichindicatorsyouwanttoshowon
thumbnailsandwhichyouwanttohide.
ALL HIDE:
ON: Allindicators(MARKER,TEXTMEMO,
WIDE,PROXY)arenotdisplayed.
OFF: Indication/Noindicationwillbeset
dependingonthefollowingmenu.The
factorysettingsareasfollows.
MARKER:
Switchestheshotmarkmarkerbetween
indicationandnoindication(ON/OFF).The
factorysettingisON(indication).
TEXT MEMO:
Switchesthetextmemomarkerbetween
indicationandnoindication(ON/OFF).The
factorysettingisON(indication).
WIDE:
Switchesthewidemarkerbetweenindication
andnoindication(ON/OFF).Thefactory
settingisON(indication).
PROXY:
Switchestheproxyindicatorbetween
indicationandnoindication(ON/OFF).
ThefactorysettingisON(indication).
Thumbnail operations (continued)