Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
82
Shot mark
Ashotmarkcanbeaddedtoaclipthumbnailto
distinguishthisclipfromtheothers.
1 Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
ThethumbnailscreenappearsontheLCD
monitor.
2 Push the Operation lever in the ◄ ►
direction and position the pointer on the
clip you wish to attach a shot mark to.
3 Press the USER button to which the shot
mark function has been allocated.
•
Thisaddsashotmarktothethumbnailofthe
clipatthepointerposition.
•
Todeleteashotmark,positionthepointer
overthedesiredclipagainandpressthe
USERbuttontowhichtheshotmarkfunction
hasbeenallocated.
•
“UsingtheUSERbuttons”(Page39)
•
A shot mark can be attached during
recording.
•
Adding shot marks after recording stops,
attaches the shot mark to the most recently
recorded clip.
·
“Shotmarkfunction”(Page41)
•
When adding a shot mark to (or deleting
the shot mark from) a clip recorded across
multiple P2 cards, do this with all these P2
cards inserted into P2 card slots.
Text memo
Duringrecordingorplayback,youcanaddtext
memostoclips.Textmemoscanbeusedtoplay
backclipsatsomepointorbreakclipsintochunks
andcopythenecessaryportions.
Adding a text memo
Textmemoscanbeaddedinoneofthefollowing
ways.
•
Duringrecording/playback,presstheUSER
buttontowhichthetextmemofunctionhasbeen
allocated.
Atextmemoisattachedatthepositionwherethe
buttonwaspressed.(Page42)
•
PressingtheUSERbuttontowhichthetext
memofunctionhasbeenallocatedwhenthe
thumbnailscreenisdisplayedaddsatextmemo
atthestartoftheclipcurrentlyindicatedbythe
pointer.
•
“UsingtheUSERbuttons”(Page39)
One clip can have up to 100 text and voice
memos in combination. Note that camera-
recorder is not capable of adding or showing
voice memos.
Thumbnail operations (continued)
 previous next