Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
60
Conguration of setup data les
ThiscameramakesitpossibletosaveasceneletoeachoftheF1toF6positionsontheSCENEFILE
dial.
UseofanSDmemorycardmakesitpossibletosaveuptofouroftheF1toF6lesonanSDcardforlater
retrieval.
Thesettingmenuvaluescanbestoredasauserleinthecamera-recorderanduptofourlescanbe
storedontheSDmemorycard.
Thesettingdatalesareconguredasshownbelow.
F1 Default value
SCENE FILE
(Factory defaults)
SCENE FILE
screen INTIAL
*1
SCENE FILE screen
LOAD/SAVE
*1
F2 Default value
F3 Default value
F4 Default value
F5 Default value
F6 Default value
F1 Current value
SCENE FILE
(Current operating status values)
F2 Current value
F3 Current value
F4 Current value
F5 Current value
F6 Current value
F1 Saved value
SCENE FILE
(Saved camera values)
F1
F2
F3
F4
F5
F6
SCENE
FILE 1
F1
F2
F3
F4
F5
F6
SCENE
FILE 2
F1
F2
F3
F4
F5
F6
SCENE
FILE 3
F1
F2
F3
F4
F5
F6
SCENE
FILE 4
USER FILE1
USER FILE2
USER FILE3
USER FILE4
USER FILE initial value
USER FILE
(Factory defaults)
OTHER FUNCTIONS screen
USER FILE INTIAL
OTHER FUNCTIONS screen
USER FILE LOAD/SAVE
CARD FUNCTIONS screen
SCENE FILE LOAD/SAVE
*2
*1: SCENE FILE dial unit
*2: All files F1 to F6
Current USER FILE values
USER FILE
(Current operating status values)
Saved USER FILE values
USER FILE
(Saved camera values)
SCENE FILE
(SD CARD)
USER FILE
(SD CARD)
F2 Saved value
F3 Saved value
F4 Saved value
F5 Saved value
F6 Saved value
CARD FUNCTIONS screen
USER FILE
LOAD/SAVE
AG-HPX250P/AG-HPX250EN SD CARD
•
Running the menu option MENU INIT in the OTHER FUNCTIONS screen returns all current
operating status values and saved camera-recorder values in the F1 to F6 scene les as well as
in the user le to their factory defaults. This function does not return the TIMEZONE setting to
its factory default.
•
SCENE FILE and USER FILE settings cannot be operated when recordings can be compiled to
a previous clip in one-clip recording mode (i.e., when “1
CLIP” is displayed). After closing the
menu, push the Operation lever in the ▼ direction (STOP) for approximately 2 seconds, and try
once more after ending clip linking.
Using scene les (Scene File Data) (continued)
 previous next