Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
34
Adjusting the black balance
Theblackbalancemustbeadjustedwhen:
•
YouuseyourAG-HPX250P/ENthersttime.
•
YourAG-HPX250P/ENhasnotbeenusedfor
sometime.
•
Theambienttemperaturehaschanged
substantially.
•
Thegainswitchovervaluehasbeenchanged.
•
ThemenuoptionsSYSTEMMODEandREC
FORMATintheSYSTEMSETUPscreen.
Adjusttheblackbalancebeforeshootingtoensure
optimumvideoquality.
AWB button
Useforautomaticcontrolof
whitebalance.
1 Press and hold the AWB button for
approximately 2 seconds.
•
Blackbalanceisadjustedafterthewhite
balance.
Aswhitebalanceisadjustedrst,setthe
conditionsforwhitebalanceadjustment
beforehand.
2 During adjustment, the viewnder displays
the following message:
ABB ACTIVE
3 The adjustment will take effect in a few
seconds and the following message will
appear:
ABB END
Theadjustedvalueisautomaticallystoredin
thememory.
Adjusting the white balance and black balance (continued)
•
During a black balance adjustment, light is
automatically cut off.
•
Black balance adjustment is not available
during recording.
•
Pressing the START/STOP button during
ABB adjustment will not start recording on
a P2 card.
 previous next