Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
90
*TheCOUNTvalueisindicatedasafour-digit
number.
TheCOUNTvalueisincrementedeachtimea
newclipiscapturedifclipmetadatahasbeen
readinandTYPE2hasbeenselectedasthe
recordingmethod.
TheCOUNTvaluecanberesetusingthe
followingprocedure.
SelectMETADATA→PROPERTYfromthe
thumbnailmenu,thenselectUSERCLIPNAME
todisplaythemenushownbelow.
SelectCOUNTRESETwiththeOperationlever
andpresstheSETbuttonontheOperationlever
toresettheCOUNTvalueto1.
When a P2 card with a memory capacity of 8
GB or more is used in camera-recorder and a
one-time continuous recording exceeds the
prescribed duration (DVCPRO HD and the
AVC-Intra 100: about 5 minutes; DVCPRO50
and the AVC-Intra 50: about 10 minutes;
DVCPRO or for DV: about 20 minutes) or
when a one-time recording extends over
more than one P2 card, the recording
concerned will automatically be undertaken
as a separate clip. At this time, each clip will
be provided with its own COUNT value.
Thumbnail operations (continued)
To set whether or not the uploaded
metadata is recorded
SetON/OFFinMETADATA→RECORDfromthe
thumbnailmenu.ThefactorysettingisOFF.
Selecting the USER CLIP NAME
recording method
SelectMETADATA→USERCLIPNAMEfromthe
thumbnailmenutoselecttherecordingmethod.
Twooptionsareavailable:TYPE1andTYPE2.
•
TYPE1 (Factory setting)
USER CLIP NAME to be
recorded
If clip metadata has
been read in
Uploadeddata
If no clip metadata has
been read in or if the
setting for recording
clip metadata has
been turned off
SameasGLOBALCLIP
ID(UMIDdata)
•
TYPE2
USER CLIP NAME to be
recorded
If clip metadata has
been read in
Uploadeddata+COUNT
value*
If no clip metadata has
been read in or if the
setting for recording
clip metadata has
been turned off
SameasCLIPNAME
 previous next