Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
56
Using scene les (Scene File Data)
Changing scene le settings
■
Example 1: Change the name of the scene
le.
1 Turn the scene le dial, then select the
scene le to be changed.
2 Select the menu option NAME EDIT in
the SCENE FILE screen, then press the
Operation lever in the ▲ ▼ direction.
•
Fordetailsonmenuoperation,referto“Using
thesetupmenus”(Page28ofVol.1).
PUSH MENU TO RETURN
SKIN TONE DTL
V DETAIL FREQ
NAME EDIT
NORM1
AUTO
OFF
THIN
MATRIX
KNEE
HD NORMGAMMA
SCENE FILE F3:SPARK
3 Press SET on the Operation lever (or push
it in the ► direction), then push it in the ▼
direction, select CHANGE, and press SET
once again.
PUSH MENU TO RETURN
SKIN TONE DTL
V DETAIL FREQ
NAME EDIT
NORM1
OFF
THIN
RETURN
CHANGE
MATRIX
AUTOKNEE
HD NORMGAMMA
SCENE FILE F3:SPARK
4 Set the lename with 6 characters by using
Operation lever when the screen below is
displayed.
•
▲ ▼:Charactershift
◄►:Characterselection
SET:Characterx
•
Charactersthatcanbeset
space(□)→alphabet(AtoZ)
→numerics(0to9)
→symbols(;:<=>?@[\]^_-./).
•
IftheRESETbuttonispressedwhenthe
lenamehasbeenset,thecharactersare
cleared.
PUSH MENU TO RETURN
S P A R K
SW POSITION F3
NAME EDIT
EachpositionoftheSCENEFILEdialstores
settingsforspecicshootingsituations.
Whenshooting,youcanretrievethenecessaryle
instantlyusingsceneledial.
SCENE FILE dial
•
Notethatchangingscenelesduringrecording
willnotchangeVFRandframeratesettings.
Tomakesuchchanges,setitonrecording
standbystatus.
■
Factory setting
F1 (SCENE)
Filesuitablefornormalshooting.
F2 (SCENE FLUO.)
Filesuitableforshootingunderuorescentlights,
ie.indoors.
F3 (SCENE SPARK)
FilesuitableforSDshootingwithagreaterrange
ofresolution,coloringandcontrast.
F4 (SCENE B-STR)
Fileforincreasingthecontrastofdarkareas,
suchaswhenshootingsunsets.
F5 (SCENE CINE V)
Filesuitableforshootingmovie-likescenes
wherethecontrastistobeemphasized.
F6 (SCENE CINE D)
Filesuitableforshootingmovie-likescenes
wherethedynamicrangeistobeemphasized.
Changes to scene les do not affect SYSTEM
MODE settings. Use the SYSTEM SETUP
screen to make such changes.
 previous next