Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
33
Shooting
7 The adjustment will take effect in a few
seconds, and the following message will
appear:
•
Theadjustedvalueisautomaticallystoredin
theselectedmemory(AorB).
AWB A OK 3.2K
•
“CTEMP+7”to“CTEMP-7”willappearwhen
COLORTEMPofthesceneleissettothe
valueotherthan0.
8 If the subject’s color temperature is lower
than 2300K or higher than 9900K the
following message appears:
•
Ifthearrowpointsdown(↓)theactualcolor
temperatureislowerthanthetemperature
indicated.Ifthearrowpointsup(↑)theactual
temperatureishigherthanthetemperature
indicated.
AWB A OK 2.3K ↓
When you have no time to adjust the white
balance
PositiontheWHITEBALswitchatPRST.
•
Youcanswitchbetween3200Kand5600Kby
pressingtheAWBbutton.
When the white balance has not been
automatically adjusted
Whenthewhitebalancehasnotbeensuccessfully
adjusted,theviewnderorLCDmonitordisplays
anerrormessage.
Error message Description
→ Adjustment details
AWBAch(orBch)
NG
Thecolortemperatureistoo
highortoolow.
LOWLIGHT Thereisinsufcientlight.
→Increasestheamountof
light.Alsoincreasesgain.
LEVELOVER Thereistoomuchlight.
→Reducestheamountof
light.Alsoreducesgain.
Viewnder displays related to white balance
•
Fordetailsonthescreendisplayofthe
viewnder,see“Screendisplays”(Page121).
Setting auto tracking white balance (ATW)
Thiscamera-recorderisequippedwithanauto
trackingwhitebalance(ATW)functionthat
automaticallyadjuststhewhitebalanceofimages
inaccordancewithlightingconditions.
TheATWfunctioncanbeassignedtotheWHITE
BALswitchBbysettingthemenuoptionATWin
theSWMODEscreentoBch.
Also,youcanallocatetheATWfunctiontoUSER
MAINorUSERbuttons1to4.
•
“UsingtheUSERbuttons”(Page39)
Cancelling auto tracking white balance
PresstheUSERbuttontowhichATWwas
assignedasecondtimeorchangetheWHITEBAL
switchposition.IfATWwasassignedtotheWHITE
BALswitchB,theUSERbuttoncannotbeusedto
cancelthefunction.
•
This function does not provide a 100 %
accurate white balance. The tracking
performance relative to changes in ambient
lighting and white balance performance
have been given a degree of latitude.
•
In variable frame rate (VFR) mode, ATW is
not available when the frame rate is set to
4 frames or less.
 previous next