Panasonic AG-HPX250EN Camcorder User Manual


 
44
Pre-recording (PRE REC)
Thisfunctionisusedtostartrecordingacertain
numberofseconds(approx.3secondsforHD
recordingsorapprox.7secondsforSDrecordings)
beforeactualrecordingstarts.
Starting recording Stopping recording
Actual recording
time
PRE REC time
(time)
1 Check that the SYSTEM SETUP screen is
set up as described on page 43.
•
Refertothesection“Usingthesetupmenus”
(Page28ofVol.1)formenuoperation.
2 Select ON in the menu option PREREC
MODE in the RECORDING SETUP screen.
(Page 141)
•
Thefollowingindicationsappearinthe
specialrecordingdisplayareainthe
viewnderorLCDmonitor.
Duringrecording:“P-REC”stayslit.
Duringapause:“P-PAUSE”stayslit.
•
“Screendisplays”(Page121)
3 Press the START/STOP button.
Thissettingwillrecordaudioandvideoatime
periodpriortostartofrecording.
•
Thefollowingrecordingmodeswilldisable
thepre-recordingfunctionandstart
respectiverecordingfunctionwhenselected.
·
RecordingofvideoinputviatheIEEE1394
connector
·
Whenchangingrecordingformats
·
Afterachangefromplaybacktorecording
·
Duringintervalrecording
·
Duringone-shotrecording
·
Duringlooprecording
•
Theremaybeashortdelayinstartofaudio
andvideorecordingwhentheSTART/STOP
buttonispresseddirectlyafterswitchingfrom
thumbnaildisplayorplaybacktoviewwhat
youareshooting,afterturningthepoweron
andafterchangingthePRERECMODE.
Interval recording (INTERVAL REC)
Thisfunctionisusedtorecord1frameatthetime
intervalsetintheINTERVALTIMEitem.
1 frame
recording
(time)
1 frame
recording
1 frame
recording
Set INTERVAL
TIME setting
Set INTERVAL
TIME setting
1 Check that the SYSTEM SETUP screen is
set up as described on page 43.
•
Refertothesection“Usingthesetupmenus”
(Page28ofVol.1)formenuoperation.
2 Select INTERVAL in the menu option
PREREC MODE in the RECORDING SETUP
screen. (Page 141)
3 Set the time in the menu option INTERVAL
TIME in the RECORDING SETUP screen.
(Page 141)
4 Press the START/STOP button.
•
Thecamera-recorderwillrepeat1-frame
recordingforthetimeintervalsetinthe
INTERVALTIMEoption.
•
PushtheOperationleverinthedirection
(STOP)tostoprecording.
•
Tocancelthisfunction,turnthecamera-
recorderofforselectNORMALintheREC
FUNCTIONoption.
•
Thefollowingindicationsappeartotheleftof
theoperationstatusdisplay.
·
Duringrecording:“I-REC”stayslit.
·
Duringapause:“I-PAUSE”stayslit.
Whenasettingoflessthan2secondsis
madeinstep3,“I-REC”blinksaccordingto
timesettingduringrecording.
·
Whenstopped:“I-”in“I-PAUSE”blinks.
Using special recording modes (continued)