Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
62
Using time data (continued)
■
Date (real time)
•
Thebuilt-inclockcalculatestheyear,month,day
andtimefromtheinternalclocktodisplayon
videointheLCD,viewnderandVIDEOOUT
andothervideooutput.
•
Theinternalclockisnotonlyusedtocalculate
thefreeruntimecodewhenthepowerisoffand
tosettheuserbityear,dateandtime,butalso
tosetlecreationdateswhenclipsarerecorded
thatdeterminetheorderofthumbnailsand
playbackorder.
•
Itisalsousedforgeneratingclipmetadataand
UMID(UniqueMaterialIdentier).
·
“Settingthecalendar”(Page26ofVol.1)
Setting user bits
UsethesettingmenuUBMODEonthe
RECORDINGSETUPscreentoselecttheuserbits
torecordinthesubcodearea.(Page142)
USER:
Recordsinternaluservalues.Tosetuservalues,
setthemenuUBPRESETscreen.Setvaluesare
retainedafterthepoweristurnedoff.
•
“Enteringtheuserbits”(Page63)
TIME:
Recordsthetimecalculatedbytheinternalclock.
DATE:
Recordstheyear,monthanddaytimedigitsfrom
theinternalclock.
EXT:
RecordstheuserbitsinputtotheTCIN/OUT
connector.
Recordingof1394inputalsorecordsuserbits
inputtotheDVCPRO/DVconnector.
TCG:
Recordsthetimecodevalue.
FRM. RATE:
Recordstheframerateinformationofcamera
capture.
Anativerecordedclipisplayedbackatthe
sameframerateastheVITCUBregardlessof
recordedvalues.UsethissettingwhenaPCor
othereditingdeviceistousetheuserbitframe
rate.
•
“Framerateinformationrecordedinuserbits”
(Page64)
•
ToslavelocktotheuserbitsinputtotheTCIN/
OUTconnector,settoEXT.
•
Inslavemode,theUBindicatorishighlighted.
•
Aslaverelationship,oncestarted,continueseven
afterinputfromtheTCIN/OUTorDVCPRO/DV
connectorends.Notethatthefollowingevents
releaseuserbitslavestatus.
·
WhenaUBMODEoptionissettosomething
otherthanEXT.
·
WhenUBPRESETisperformed
·
Whenswitchingto1394inthemenuoption
RECSIGNALintheSYSTEMSETUPscreen.
·
Turningthepoweroff.
•
Theinternaluservalueretainstheslavevalues
evenafterslaverelease.
To input an external time code from the TC
IN/OUT terminal, it is necessary to set TC IN/
OUT SEL on the setting menu OUTPUT SEL
screen to TC IN.
 previous next