Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
118
Using a hard disk drive (PC mode: USB host) (continued)
MISSING CLIP!
Ashotmarkwillbeaddedtotheclipsrecorded
onmultipleP2cardswhenallP2cardsarenot
insertedyet.
InsertallP2cardswithrecordedclips,and
conrmthatthe
incompleteclipindicators
disappear,andthenaddshotmarks.
NO CARD!
NoP2orSDcardisinserted.
Insertcompatiblemedia.
NO COPY TO SAME CARD!
Aclipcannotbecopiedtothecardstoringthe
originalclip.
Copytheselectedcliptoacardthatdoesnot
containtheoriginalclip.
NO FILE!
Thedesignatedleisnotfound.
Checkthele.
SAME CLIP IS SELECTED!
Imagescannotbecopiedsincethecliphas
alreadybeencopiedfromtheoriginalclip.
Conrmtheselectedclipandreleaseeither
thesourcecliporthedestinationclipandthen
executethecopyoperation.
TOO MANY CLIPS!
Thenumberofclipsonthecopytargetcard
exceeds1000.
Reducethenumberofselectedclips.
UNKNOWN CONTENTS FORMAT!
Warningdisplayedtoindicatecontentsversion
mismatch.
Matchdevicesandcontentsversion.
UNKNOWN DATA!
Themetadatacharactercodeisinvalid.
UseUTF-8forthemetadatacharactercode.
Usetheviewertoentercorrectcharacters.
USER CLIP NAME MODIFIED!
Charactersintheclipnamehadtobedeleted
inaddingthecountervalue.
Theuserclipnameplusthecountervaluecan
onlycontainupto100bytes.Charactersinthe
clipnameareautomaticallydeletedwhenthe
totalexceeds100bytes.
WRITE PROTECTED!
TheP2orSDcardiswriteprotected.
Insertwrite-enabledmedia.
■
Soft keyboard
Message
Description/Measure
CANNOT CHANGE!
[PERSON]willbeenteredwhilethetextmemo
isnotavailable.
Enter[TEXT]beforeentering[PERSON].
CANNOT SET!
INVALID VALUE!
Theenteredvalueisincorrect.
Changethevalue.
■
HDD (USB HOST MODE)
Message
Description/Measure
CANNOT ACCESS CARD!
AnerroroccurredduringP2cardaccess.
CheckP2card.
CANNOT ACCESS TARGET!
Anerroroccurredduringharddiskaccess.
Checkharddiskstatusandconnection.
CANNOT FORMAT!
Theharddiskcannotbeinitialized.
Connectanotherharddiskdrive.
CANNOT RECOGNIZE HDD!
Thedestinationtargetcannotbeproperly
recognized.
Reboottheharddiskorconnectadifferent
harddisk.
CARD IS EMPTY!
CANNOT COPY!
TheP2selectedforcopyingisempty.
Copyingisnotperformedsincethecardis
empty.
FORMAT P2 CARD!
Thiswarningindicatesthatdatacouldnot
beimportedfromaharddisktoaP2card
becausetheP2cardcontainedrecordeddata.
YoucannotcopytoaP2cardthatcontains
data.
FormatthecardonaP2deviceandcopy
again.
 previous next