Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
84
Using a text memo to break a clip and
copy the necessary portion
1 Select a desired text memo in a clip by
carrying out steps 1-3 for “Playing back a
clip at the position where a text memo is
recorded” (Page 83).
2 Move the pointer to the desired text memo,
and then press the SET button on the
Operation lever.
Youcanselectmorethanonetextmemo.
3 Press the MENU button to select
OPERATION → COPY.
4 User the Operation lever and SET buttons
to select the destination slot. Then, select
YES.
•
Copyingstarts.
•
Theportionbetweentheselectedtextmemo
andthenextoneiscopied.Ifnotextmemo
isfoundaftertheselectedone,thenallpart
aftertheselectedtextmemoiscopied.
•
Ifmultipletextmemosareselected,the
selectedsectionsarecopied.
•
Whentheclipisbeingcopied,thecamera-
recorderindicatestheprogressofthe
copyprocessandcancellationstatus.To
discontinuethecopyprocess,presstheSET
buttonontheOperationlever.Then,aYES/
NOconrmationscreenisdisplayed.Usethe
OperationlevertoselectYES.
In clip division and copying using the text
memo function, the area copied may be
automatically modied depending on the
recording format of the clip.
Deleting clips
1 Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
ThethumbnailscreenappearsontheLCD
monitor.
2 Push the Operation lever in the ◄ ►
direction and position it on the clip you
wish to delete. Press SET on the Operation
lever to select the clip.
Multipleclipscanbeselected.
3 Press the MENU button and select
OPERATION → DELETE from the thumbnail
menu.
4 The following screen appears. Use the
Operation lever to select YES.
Theclipisdeleted.Allselectedclips(inblue-
greenframes)aredeletedbythisoperation.
To interrupt deleting, press the SET button on
the Operation lever to cancel the operation.
Partially deleted clips cannot be restored by
canceling.
Thumbnail operations (continued)
 previous next