Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
112
Using a hard disk drive (PC mode: USB host) (continued)
Using the USB HOST mode
Usable hard disk drives
•
HarddiskdrivesconnectableviaUSB2.0
•
Theunitscompatiblewiththestorageunitthat
hasPanasonicUSBI/F
RefertothesupportsiteatthefollowingWebsite
forthecompatibleunits.
http://pro-av.panasonic.net/
•
While the USB HOST mode supports USB
bus power (5 V, 0.5 A), some hard disk
drives may not activate. If this is the case,
power must be supplied in a different way.
•
Do not connect more than one drive even
through a hub or any other device. Even
with devices other than a hard disk drive,
do not connect to the drive together with
the hard disk drive through a hub.
•
The unit does not support a hard disk drive
of 2 TB (2048 GB) or more.
•
To prevent copying or formatting problems
from occurring during connection to a
hard disk drive, be sure that the camera’s
battery is sufciently charged or use the
AC adaptor.
•
Versions 2.** and later of the P2 STORE
(AJ-PCS060G) support USB host mode for
this unit.
Versions 1.** cannot connect. Please
upgrade.
Viewing hard disk drive information
Youcanviewtheinformationontheharddiskdrive
connectedviaUSBwiththefollowingsteps.
1 Switch the mode to USB HOST.
•
“SwitchingtotheUSBHOSTmode”(Page111)
•
Thethumbnailscreenisdisplayed.
(USBHOSTisdisplayedinthebottomright.)
2 Connect the hard disk drive to the camera-
recorder via USB 2.0.
3 Press the MENU button and select HDD →
EXPLORE from the thumbnail menu.
Thescreenprovidestheinformationaboutthe
harddiskdrive.
For Type S or P2 STORE
Press the EXIT button. ↑↓ Press the SET button.
For the FAT
Press the EXIT button. ↑↓ Press the SET button.
 previous next