Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
47
Shooting
One-clip recording (ONE CLIP REC)
Insteadofcreatinganewclipforeachrecording
session(i.e.,operationfromRECstarttostop),
thismodecompilesimagesfrommultiplerecording
sessionsintoasingleclip.
REC Start REC Start REC Start
First
Recording
Second
Recording
Nth
Recording*
REC stop REC stop REC stop
Single Combined Clip
*Uptoamaximumof99recordingscanbe
combinedintoasingleclip.Whenthe99th
recordingends,recordingsarenolonger
automaticallycombinedintothesameclip.
Subsequentrecordingsarecombinedintoanew
clip.
Tousethisfunction,setthemenuoptionONE
CLIPRECtoONintheRECORDINGSETUP
screen.(Page142)
Whenone-cliprecordingmodeisenabled,“1-CLIP”
appearsintheviewnderandatthetopoftheLCD
monitor.
WhenyoupresstheSTART/STOPbuttonon
thecamera-recordertostartyourrstrecording,
“START1CLIP”appears.
Anysubsequentrecordingsareautomatically
combinedintotheclip.Uptoamaximumof99
clipscanbecombinedintoasingleclip.
To record a new clip
Followtheinstructionsbelowtouseanewand
separateclipandendcombiningtotheclip.
•
PushandholdtheOperationleverinthe
direction(STOP)forabout2secondswhile
recordingispaused.(operatingwhilerecordingis
onstandby)
Or
•
PressandholdtheSTART/STOPbuttonfor
about2secondstostoprecording.(operating
whilerecordingisinprogress)
Followtheinstructionsabovetoendcombining
totheclip.“END1-CLIP”displays.Subsequent
recordingsuseanewandseparateclip.
•
In addition to the aforementioned steps, the
following ends combining to the clip and
subsequent recordings use a new clip.
·
Whenthepoweristurnedoff
·
WhentheP2cardwiththepreviousrecording
isremoved
·
WhentheP2cardisformattedortheclipis
deleted(whenthepreviouscombinedclip
doesnotexist)
•
The clip does not stop combining even
when the STOP button is pressed in the
Menu or on the thumbnail display.
To exit one-clip recording mode
SetthemenuoptionONECLIPRECtoOFF.
To cue to the start of the combined section of
the clip
Atextmemocanbeautomaticallyaddedtothe
startoftherecording,thestartofasectioncan
becuedforplayback,andthethumbnailofthe
locationcanbecheckedbeforeeachrecording.
Toautomaticallyaddatextmemotothestartpoint
oftherecording,setthemenuoptionSTARTTEXT
MEMOtoONintheRECORDINGSETUPscreen.
(Page142)
Checkandplaybackthelocationoftheaddedtext
memobyselectingTHUMBNAIL→TEXTMEMO
CLIPSfromtheThumbnailMenuandmovingthe
cursoroverthedesiredclip.
Referto“Playingbackaclipatthepositionwhere
atextmemoisrecorded”(Page83)fordetails.
Tocuetothelocationofthetextmemoduring
playback,setthemenuoptionSEEKSELECTto
CLIP&TintheOTHERFUNCTIONSscreen,and
pushtheOperationleverinthe direction
whileplaybackispaused.
 previous next