Panasonic AG-HPX250EN Camcorder User Manual


 
142
RECORDING SETUP screen (continued)
Item Setting Notes
TC PRESET Setstheinitialtimecode.
•
Settheframevalueto0ormultiplesof5whenshooting/
recordingissetto24P,24PA,or24PN.
Ifanyothervalue,therecordedtimecodewillmis-
match.
UB MODE
Setsthedatarecordedinthecamera-recorderuserbits.
USER, TIME, DATE, EXT, TCG, FRM. RATE
“Settinguserbits”(Page62)
UB PRESET Setstheuserinformation.SelectUSERinUBMODE.
ONE CLIP REC
Setsone-cliprecordingmode.
ON, OFF
“One-cliprecording(ONECLIPREC)”(Page47)
•
Notavailableinthefollowing
conditions.
·WhenRECFUNCTIONis
settosomethingotherthan
NORMAL.
·WhenRECSIGNALissetto
1394.
·WhenVFRissettoON.
START TEXT
MEMO
Setswhethertoautomaticallyaddatextmemoatthe
recordingstartpositioneachtimeyoustartrecording.
ON, OFF
•
NotavailablewhenREC
FUNCTIONissettosomething
otherthanNORMAL.
•
Thetextmemothatisadded
whenthisissettoONindicates
therecordingstartposition.
Fordetailsonrecordingthetext
memoastextinformation,refer
to“Settingofclipmetadata”
(Page87).
TIME STAMP
Determineswhetherornotdateandtimeinformationwill
besuperimposedontheimage.
ON:
Superimposesdateandtimeinformationontheimage.
OFF:
Doesnotsuperimposedateandtimeinformationonthe
image.
<Note>
WhenDATE/TIMEontheDISPLAYSETUPscreen
issettoOFF,thedateandtimeinformationisnot
superimposed.
Setup menu list (continued)
___indicatesthefactorysetting.