Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
45
Shooting
•
The pre-recording and one-clip recording
functions are not available.
•
Sound is not recorded.
•
Data recorded (until the stop recording) in
this mode is recorded as a single le.
•
There is no output from the DVCPRO/DV
connector.
One-shot recording (ONE SHOT REC)
Thisfunctionrecordsasingleshotateachunitof
timewhichhasbeenset.
1 Check that the SYSTEM SETUP screen is
set up as described on page 43.
•
Refertothesection“Usingthesetupmenus”
(Page28ofVol.1)formenuoperation.
2 Select ONE SHOT in the menu option REC
FUNCTION in the RECORDING SETUP
screen. (Page 141)
3 Set the time in the menu option ONE SHOT
TIME in the RECORDING SETUP screen.
(Page 141)
4 Press the START/STOP button.
•
Thecamera-recorderwillpauserecording
aftermakingarecordingthatlaststhe
durationsetinstep3.
•
PushtheOperationleverinthedirection
(STOP)tostoprecording.
•
Tocancelthisfunction,turnthecamera-
recorderofforselectNORMALintheREC
FUNCTIONoption.
•
Thefollowingindicationsappeartotheleftof
theoperationstatusdisplay.
·
Duringrecording:“I-REC”stayslit.
·
Duringapause:“I-PAUSE”stayslit.
·
Whenstopped:“I”-in“I-PAUSE”blinks.
•
No other functions are available during
operation.
•
The pre-recording and one-clip recording
functions are not available.
•
Sound is not recorded.
•
Data recorded (until the stop recording) in
this mode is recorded as a single le.
•
There is no output from the DVCPRO/DV
connector.
•
During continuous one-shot recording,
recording operation speed may be
decreased.
 previous next