Panasonic AG-HPX250EN Camcorder User Manual


  Open as PDF
of 170
 
97
Playback
When “USED” is selected:
3
5
4
1 2
1. Write-protect Mark
The
markappearsiftheP2cardiswrite-
protected.
2. P2 Card Status (used memory capacity)
TheusedmemorycapacityoftheP2cardis
indicatedbyabargraphandapercentage
gure.Thebargraphindicatormovestothe
rightastheusedmemorycapacityincreases.
Thefollowingindicationsmayappear,
dependingonthecardstatus:
FORMAT ERROR:
AnunformattedP2cardisinserted.
NOT SUPPORTED:
Anunsupportedcardisinsertedinthecamera-
recorder.
NO CARD:
P2cardsarenotinserted.
PushtheOperationleverinthedirection
toplacethecursorontheP2cardfordatayou
wanttoaccessandpresstheSETbuttononthe
Operationlevertodisplaydetailedinformation
abouttheP2cardtocheckindividualinformation
suchastheserialnumberandtheuserID.
3. P2 Card memory capacity/Total Capacity
DisplaystheusedmemorycapacityonaP2
cardandthetotalcapacity,inminutes.Because
fractionsaretruncated,thegureshownfor
usedmemorycapacityonaP2cardmaydiffer
fromthegurefortotalcapacity.
Theusedmemorycapacityofawrite-protected
P2cardisdisplayedas100%.
DuringnativerecordingwithVFR,thischanges
dependingontheframerate.
4. Total used memory capacity for all slots
Displaysthetotalusedmemorycapacityforall
2slots.
Pleasenotethattheremainingcapacityofa
writeprotectedP2cardisnotincludedinthe
totalremainingcapacity.
WhenRECFUNCTIONissettoLOOP,theslot
totalindicatesthestandardrecordingtimefor
looprecording.However,whenPROPERTY
SETUP→USEDisselected,theusedspace
oftheslottotalisgreaterthanthatactually
used,andislessthanthatactuallyusedwhen
PROPERTYSETUP→REMAINisselected.
5. Warning symbol
WhenthefollowingP2cardisdetected,the
symbolisdisplayed.
RUN DOWN CARD:
Themaximumnumberofoverwritesonthe
P2cardhasbeenexceeded.
DIR ENTRY NG CARD:
ThedirectorystructureontheP2cardisnot
supported.
ThewarningcanbeconrmedontheP2card
detailedinformationindicationin“2.P2Card
Status(usedmemorycapacity)”(Page97).
 previous next