Polycom 2000 Security Camera User Manual


  Open as PDF
of 1183
 
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 130
Resolution Configuration - Basic
The Resolution Configuration basic dialog box contains the following panes:
Max CP Resolution Pane
Resolution Configuration Pane
Maximum CP Resolution Pane
In MPMx/MPMRx Card Configuration Mode the Collaboration Server can be set to one of the following
Maximum CP Resolutions:
HD 1080p60
HD 1080p30
HD 720p30
SD 30
CIF 30
Limiting Maximum Resolution
Before a selection is made in this pane, the Maximum CP Resolution of the system is determined by the
MAX_CP_RESOLUTION System Flag.
The MAX_CP_RESOLUTION flag value is applied to the system during First Time Power-on and after a
system upgrade.
The default flag value is HD1080 setting the Maximum CP Resolution value in the Resolution
Configuration dialog box to 1080p60.
All subsequent changes to the Maximum CP Resolution of the system are made by selections in this pane.
The Maximum Resolution can further be limited per conference or per participant endpoint.
The Maximum Conference Resolution, can be limited via the Profile - Video Quality dialog box. For more
information see Defining New Profiles.
The Maximum Resolution can further be limited per participant endpoint via the Participant - Properties
dialog box. For more information see Managing the Address Book.
Resolution Configuration Pane
The user can select from 3 pre-defined Resolution Configurations or select a manual Resolution Slider
adjustment mode. The pre-defined settings can be accepted without modification or be used as the basis
for manual fine tuning of resolution settings by the administrator.
The Manual radio button is automatically selected if any changes are made to the Resolution Sliders.