Polycom 2000 Security Camera User Manual


  Open as PDF
of 1183
 
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 311
Phone Number
(ISDN/PSTN Only)
Enter the phone number of the ISDN/PSTN participant.
Note: This field is only displayed when the ISDN/PSTN protocol is selected.
ISDN participants are not supported with Collaboration Server 1800.
Alias Name/Type
(H.323 Only)
If you are using the endpoint’s alias and not the IP address, first select the type of
alias and then enter the endpoint’s alias:
H.323 ID (alphanumeric ID)
E.164 (digits 0-9, * and #)
Email ID (email address format, e.g. abc@example.com)
Participant Number (digits 0-9, * and #)
Notes:
Although all types are supported, the type of alias is dependent on the gatekeeper’s
capabilities. The most commonly supported alias types are H.323 ID and E.164.
This field is used to enter the Entry Queue ID, target Conference ID and
Conference Password when defining a cascaded link.
Use of the E.164 Number is dependent on the setting of the
REMOVE_IP_IF_NUMBER_EXISTS System Flag. For more information see
Substituting E.164 Number in Dial String.
This field is removed from the dialog box when the ISDN/PSTN protocol is selected.
SIP Address/Type
(SIP Only)
Select the format in which the SIP address is written:
SIP URI - Uses the format of an E-mail address, typically containing a user name
and a host name: sip:[user]@[host]. For example, sip:dan@polycom.com.
Note: If the SIP Address field contains an IPv6 address, it must be surrounded by
square brackets, for example, [::1].
TEL URI - Used when the endpoint does not specify the domain that should
interpret a telephone number that has been input by the user. Rather, each domain
through which the request passes would be given that opportunity.
For example, a user in an airport might log in and send requests through an outbound
proxy in the airport. If the users enters 411 (this is the phone number for local
directory assistance in the United States), this number needs to be interpreted and
processed by the outbound proxy in the airport, and not by the user's home domain.
In this case, tel: 411 is the correct choice.
Note: This field is removed from the dialog box when the ISDN/PSTN protocol is
selected.
Endpoint Website
IP Address
(IP only)
Enter the IP address of the endpoint’s internal site to enable connection to it for
management and configuration purposes.
This field is automatically completed the first time that the endpoint connects to the
Collaboration Server. If the field is blank it can be manually completed by the system
administrator. The field can be modified while the endpoint is connected
Audio Only Select this check box to define the participant as a voice participant, with no video
capabilities.
New Participant - General (Continued)
Field Description