Polycom 2000 Security Camera User Manual


  Open as PDF
of 1183
 
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 141
People+Content is enabled by default. It can be disabled for all conferences and endpoints by
manually adding the ENABLE_EPC System Flag to the System Configuration and setting its value
to NO (default setting is YES).
Endpoints that support People+Content (for example, FX endpoints) may require a different signaling
protocol. For these endpoints, manually add the System Flag CS_ENABLE_EPC to the System
Configuration and set its value to YES (default value is NO).
Content sharing is not supported in Microsoft ICE environment (BFCP protocol).
Video endpoints that do not support SIP Content (such as PVX), can receive Content on the People
channel if the conference is set to Send Content to Legacy Endpoints. For more details see,
Sending Content to Legacy Endpoints (AVC Only).
HD1080p30 Content is supported:
On RealPresence Collaboration Server model 1800.
On RealPresence Collaboration Server models 2000 and 4000, with MPMRx cards installed.
At a maximum content rate of 2048 kbps on RealPresence Collaboration Server 2000 and 4000.
At a maximum content rate of 4096 kbps on RealPresence Collaboration Server 1800.
HD1080p60 Content is supported:
On the RealPresence Collaboration Server 1800.
In the normal (switched) Content mode.
In AVC-CP conferencing mode only.
With SIP and H.323 endpoints
With the H.263 and H.264 Auto Selection, H.264 HD and H.264 Cascade and SVC Optimized.
Content protocol options.
With Customized Content Rates.
In (H.323) Cascaded conferences.
On Legacy Endpoints when the Send Content to Legacy Endpoints option is selected.
Content is shared using the video channel.
HD1080p30 and HD1080p60 Content are not supported:
By MCUs containing MPMx cards.
With RealPresence® Content Sharing Suite for Microsoft® Lync® endpoints.
By ISDN endpoints.
When TIP compatibility is set to Prefer TIP or Video and Content.
TIP Content is shared at XGA Resolution at 5 frames per second.
By H.263 Content Protocol.
In Multiple Content Resolutions mode.
If the Content was defined as High Profile, endpoints which support only Base Profile Content will
not be able to receive Content using the Content channel. If the Send Content to Legacy
Endpoints o
p
tion is selected they can receive Content shared using the video channel.