RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 766
BLOCK_CONTENT_LEGACY_F
OR_LYNC
This flag is used to control the system behavior in an environment
where some Lync clients use the Polycom CCS plug-in and some do
not.
When set to NO (default), Content is sent to all Lync clients over the
video channel, including those with the plug-in installed, even when the
Send Content to Legacy Endpoints is disabled. Other, non-Lync legacy
endpoints will not be affected by this flag and will receive content
according to the Send Content to Legacy Endpoints settings in the
conference Profile.
When set to YES, Content is not sent to Lync clients over the video
channel including those with the Polycom CCS plug-in installed, even
when the Send Content to Legacy Endpoints is enabled. Other,
non-Lync legacy endpoints will not be affected by this flag and will
receive content according to the Send Content to Legacy Endpoints
settings in the conference Profile.
BONDING_DIALING_METHOD
(ISDN)
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
When set to:
• SEQUENTIAL
The MCU initiates channel connections sequentially until it reaches
the number of channels defined by the
BONDING_NUM_CHANNELS_IN
_GROUP flag.
When a channel is connected, dialing begins for the next channel in
the group.
• BY_TIMERS
The MCU initiates channel connections sequentially using the
values of the BONDING_CHANNEL _DELAY and
BONDING_GROUP_DELAY flags.
The first group of channels is dialed, using the
BONDING_CHANNEL_DELAY between dialing attempts for each
channel in the group.
The Collaboration Server then implements the
BONDING_GROUP_DELAY, before dialing the first channel of the
next group.
Default: SEQUENTIAL
BONDING_GROUP_DELAY
(ISDN)
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
When connecting several bonding groups, this is the delay (number of
1/100 seconds) preceding the first dialing attempt to connect the next
bonding group.
Default: 500
Manually Added, Modified, Deleted System Flags
Flag Description