Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 521
The following figure shows the network topology with two different media and signaling networks and one
Management network connected to the Collaboration Server (RMX) 1800.
RealPresence Collaboration Server (RMX) 1800 - Multiple Networks Topology Sample
Guidelines
● Multiple Services system mode is a purchasable option and it is enabled in the MCU license.
● Multiple Network Services are supported in MCUs with at least 1024MB memory only. MCU units with
memory of 512MB support only one IP Network Service.
● Multiple Services system mode is enabled when the system configuration flag
MULTIPLE_SERVICES is added and set to YES.
● Only IPv4 is supported for the definition of Multiple Network Services.
● When configuring Multiple Networks on the RealPresence Collaboration Server (RMX) 2000, the
RMX2000_RTM_LAN flag must be set to YES in addition to the MULTIPLE_NETWORKS=YES flag.
● Multiple Network Services are not supported with Microsoft ICE Environments in versions prior to
Version 7.8.
● Up to two Network Services, one per LAN port, can be associated with each Media card.
● An IP Network Service can be associated with one or several media cards. If more than one card is
associated with the same Network Service, the system routes the calls to the appropriate card
according to resource availability.
The MULTIPLE_SERVICE System Flag cannot be set to YES when IPv6 Addressing is enabled.