Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 756
LEGACY_EP_CONTENT_DEFAU
LT_LAYOUT
Defines the video layout to be displayed on the screen of the legacy
endpoints when switching to Content mode.
Default value: CP_LAYOUT_1P7 (1+7).
For a detailed list of possible flag values for the various video layouts,
see Legacy Endpoint Content Default Layout Flag Values.
MAX_CONF_PASSWORD_REPE
ATED_CHAR
Allows the administrator to configure the maximum number of
consecutive repeating characters that are to be allowed in a
conference password.
Range: 1 - 4
Default: 2
Note: In Version 7.7, if a Polycom DMA system is installed in your
environment, you must change the value of this flag to 4 to maintain
the compatibility between the Collaboration Server and the DMA.
MAX_CP_RESOLUTION The MAX_CP_RESOLUTION flag value is applied to the system
during First Time Power-on and after a system upgrade. The default
value is HD1080.
All subsequent changes to the Maximum CP Resolution of the system
are made using the Resolution Configuration dialog box.
Possible flag values:
• HD1080 – High Definition at 60 fps
• HD1080 - High Definition at 30 fps
• HD720 – High Definition at 60 fps
•HD – High Definition at 30 fps
•SD30 – Standard Definition at 30 fps
•SD15 – Standard Definition at 15 fps
•CIF – CIF resolution
Default: HD1080
For more information see Video Resolutions in AVC-based CP
Conferencing.
MAX_INTRA_REQUESTS_PER_I
NTERVAL_
Enter the maximum number of refresh (intra) requests for the Content
channel sent by the participant’s endpoint in a 10 seconds interval that
will be dealt by the Collaboration Server system. When this number is
exceeded, the Content sent by this participant will be identified as
noisy and his/her requests to refresh the Content display will be
suspended.
Default setting: 3
MAX_INTRA_SUPPRESSION_D
URATION_IN_SECONDS_
Enter the duration in seconds to ignore the participant’s requests to
refresh the Content display.
Default setting: 10
MAX_NUMBER_OF_MANAGEM
ENT_SESSIONS_PER_SYSTEM
Defines the maximum number of concurrent management sessions
(http and https connections) per system.
Value: 4 - 80
Default: 80
Flag Description