Polycom 2000 Security Camera User Manual


  Open as PDF
of 1183
 
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 696
Support for MIB-II Sections
The following table details the MIB-II sections that are supported:
The Alarm-MIB
MIB used to send alarms. When a trap is sent, the Alarm-MIB is used to send it.
H.341-MIB (H.341 – H.323)
Gives the address of the gatekeeper.
Supports H.341-MIB of SNMP events of H.323.
Standard MIBs
This section describes the MIBs that are included with the Collaboration Server. These MIBs define the
various parameters that can be monitored, and their acceptable values.
Supported MIB-II Sections
Section Object Identifier
system mib-2 1
interfaces mib-2 2
ip mib-2 4
Standard MIBs
MIB Name Description
MULTI-MEDIA-MIB-TC
(MULTIMTC.MIB)
Defines a set of textual conventions used within the set of Multi Media MIB
modules.
H.320ENTITY-MIB
(H320-ENT.MIB)
This is a collection of common objects, which can be used in an H.320 terminal, an
H.320 MCU and an H.320/H.323 gateway. These objects are arranged in three
groups: Capability, Call Status, and H.221 Statistics.
H.320MCU-MIB
(H320-MCU.MIB)
Used to identify managed objects for an H.320 MCU. It consists of four groups:
System, Conference, Terminal, and Controls. The Conference group consists of the
active conferences. The Terminal group is used to describe terminals in active
MCU conferences. The Controls group enables remote management of the MCU.
H323MC-MIB
(H323-MC.MIB)
Used to identify objects defined for an H.323 Multipoint Controller. It consists of six
groups: System, Configuration, Conference, Statistics, Controls and Notifications.
The Conference group is used to identify the active conferences in the MCU. The
Notifications group allows an MCU, if enabled, to inform a remote management
client of its operational status.
Note: The Collaboration Server supports only one field in H.341-H323MC MIB. The
Collaboration Server reports the Gatekeeper address using H.341-H323MC MIB –
323McConfigGatekeeperAddress (0.0.8.341.1.1.4.2.1.1.4) in response to a query
from a manager.