Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 757
MAX_NUMBER_OF_MANAGEM
ENT_SESSIONS_PER_USER
Defines the maximum number of concurrent management sessions
(http and https connections) per user.
Value: 4 - 80
Default: 10 (20 in Ultra Secure Mode)
MAX_PASSWORD_REPEAPED_
CHAR
Allows the administrator to configure the maximum number of
consecutive repeating characters to be allowed in a user password.
Range: 1 - 4
Default: 2
MAX_PASSWORD_REPEATED_
CHAR
Allows the administrator to configure the maximum number of
consecutive repeating characters to be allowed in a password.
Range: 1 - 4
Default: 2
MCU_DISPLAY_NAME The name of the MCU that is displayed on the endpoint’s screen when
connecting to the conference.
Default: POLYCOM RMX 1500/POLYCOM RMX 2000/ POLYCOM
RMX 4000POLYCOM RealPresence Collaboration Server
1800depending on the product type.
MIN_PASSWORD_LENGTH The length of passwords.
Possible value: between 0 and 20.
0 means this rule is not enforced, however this rule cannot be disabled
when the Collaboration Server is in Ultra Secure Mode.In Ultra Secure
Mode, passwords must be at least 15 characters in length (default)
and can be up to 20 characters in length.
For more details, see Password Length.
MIN_PWD_CHANGE_FREQUEN
CY_IN_DAYS
Defines the frequency with which a user can change a password.
Values: 0 -7.
0 (standard default) - users do not have to change their passwords. In
Ultra Secure Mode the retention period is between 1 (default) and 7.
For details, see Defining Password Change Frequency.
MIN_SYSTEM_DISK_SPACE_TO
_ALERT
Defines a minimum remaining Collaboration Server disk capacity in
megabytes. If the remaining disk capacity falls below this level an
active alarm is raised.
Default: 2048
MIN_TIP_COMPATIBILITY_LINE_
RATE
This flag determines the minimum line rate at which conferencing
entities such as an Entry Queue or Meeting Room can be TIP-enabled
and TIP-enabled endpoints can connect to them.
CTS version 7 requires a minimum line rate of 1024 kbps and will
reject calls at lower line rates, therefore the System Flag value should
be 1024 kbps or higher.
0 means that no minimum line rate is enforced on the conference for
TIP connectivity.
Default: 1024
Flag Description