Filter
Top Products
Chapter 4 Adjustments and Settings for Recording4-44
4
Initial page
Next page
Final page
Displaying the setup menu
Set the MENU ON/OFF/PAGE switch to ON to display the setup menu.
The status display along the top and bottom disappears from the
viewfinder screen, and the page that was on the screen when the last
menu operation ended appears.
When this menu is first used, the lowest-numbered page of the currently
selected pages for menu configuration appears. This also occurs if you
set the MENU ON/OFF/PAGE switch to ON while holding the MENU
CANCEL/PRST/ITEM switch at CANCEL.
Paging through the menu
Push the MENU ON/OFF/PAGE switch from ON to PAGE.
Every time you push this switch to PAGE, the next page of the menu is
displayed.
Paging through the menu
While a question mark appears at the left of the page title, you can use
the rotary encoder as follows to switch pages.
Turning the rotary encoder counterclockwise as seen from the front
of the camera: advances to the next menu page.
Turning the rotary encoder clockwise as seen from the front of the
camera: returns to the previous menu page.