Filter
Top Products
Chapter 5 Setting Up the Camcorder 5-19
5
3 Loosen the fixing screws on the Ff ring (flange focal length
adjustment ring).
4 Use manual or power zoom to set the lens to telephoto.
5 Point the camera at the chart, and focus on it.
6 Set the zoom to wide angle.
7 Turn the Ff ring until the chart is in focus, being careful not to
disturb the focus ring.
8 Repeat steps 4 to 7 until the chart stays in focus all the way from
wide angle to telephoto.
9 Tighten the Ff ring fixing screws.