Filter
Top Products
Chapter 4 Adjustments and Settings for Recording4-10
4
If automatic white balance adjustment cannot be made
If the white balance adjustment cannot be completed normally, an error
message will appear for about 3 seconds on the viewfinder screen (in
display mode 2 or 3).
Possible messages are listed below.
White balance adjustment error messages
Error message Meaning
If any of the above error messages is displayed, retry the white balance
adjustment. If the error message occurs again, an internal check is
necessary.
Refer to “maintenance manual” for information about this internal check.
WHITE : NG
LOW LEVEL
The white video level is too low. Either make
open the lens iris or increase the gain.
WHITE : NG
COLOR TEMP. HIGH
The color temperature is too high. Select a
suitable filter setting.
WHITE : NG
COLOR TEMP. LOW
The color temperature is too low. Select a
suitable filter setting.
WHITE : NG
TIME LIMIT
Adjustment could not be completed within the
standard number of attempts.
WHITE : NG
POOR WHITE AREA
The white area could not be checked.
WHITE : NG
LEVEL TOO HIGH
The white video level is too high. Either narrow
the lens iris opening or change the ND filter.