Samsung DVW-707, DVW-707P, DVW-709WS, DVW-709WSP, DVW-790WS, DVW-790WSP Camcorder User Manual


 
Chapter 6 Maintenance6-8
6
2 Set the AUDIO SELECT CH-1/CH-2 switches to MANUAL.
3 Adjust the MIC AUDIO LEVEL control on the front of the
camcorder. Check that the level indications increase as the control is
turned counterclockwise.
4 Testing the earphone and speaker
1 Turn the MONITOR control and check that the speaker volume
changes accordingly.
2 Connect an earphone to the EARPHONE jack. Check that the
speaker sound is cut off and that you can hear the sound from the
microphone in the earphone.
3 Turn the MONITOR control and check that the earphone volume
changes accordingly.
5 Testing external microphones
1 Set the LINE/MIC selectors to MIC.
2 Connect external microphones to the AUDIO IN CH-1/CH-2
connectors.
3 Set the AUDIO IN switches to REAR.
4 Aim the microphones at a sound source.
5 Check that the audio level meter in the display panel and the audio
level indication in the viewfinder reflect the changing sound level.
Alternatively, with a single microphone, check each channel in turn.