Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-123
4
7 To end the menu operation, set the MENU ON/OFF/PAGE switch to
OFF.
The setup menu disappears from the viewfinder screen and the
displays indicating the current status of the camcorder appear along
the top and bottom of the viewfinder.
If data cannot be read
If when you press the rotary encoder in step 6 of the above procedure
(page 4-122) one of the following error messages appears, then the data
was not read.
Reading white data for AWB
The white data for AWB can be read from a card only when WHITE
DATA READ is set to ON.
Data read error messages
Error message Reason Action
CARD NOT
INSERTED!
No setup card is inserted. Close the menu and insert
or reinsert the card.
READ ERROR!
(flashing)
Circuit or card fault Re-check, and consult a
Sony representative.
CARD DATA NG!
(flashing)
The card contains the data
that cannot be read into
this camcorder.
Do not try to read the data
written for another
camcorder.
(Continued)