Filter
Top Products
Chapter 4 Adjustments and Settings for Recording4-52
4
4 Turn the rotary encoder to select whether the indicator should
light with respect to the selected item (the “ON” setting), or not light
(the “OFF” setting).
For the “ON” setting: Press the rotary encoder, and when a
question mark appears to the left of the “ON/OFF” indication,
turn the rotary encoder counterclockwise as seen from the front
of the camera. The “ON/OFF” indication switches to “ON”.
For the “OFF” setting: Press the rotary encoder, and when a
question mark appears to the left of the “ON/OFF” indication,
turn the rotary encoder clockwise as seen from the front of the
camera. The “ON/OFF” indication switches to “OFF”.
To turn the setting of another item ON or OFF, repeat steps 3 and 4.
5 Press the rotary encoder to make the question mark to the left of the
“ON/OFF” indication disappear.
6 To end the menu operation, return the MENU ON/OFF/PAGE
switch to OFF.
The setup menu disappears from the viewfinder screen and the
displays indicating the current status of the camcorder appear along
the top and bottom of the viewfinder.