Samsung DVW-707, DVW-707P, DVW-709WS, DVW-709WSP, DVW-790WS, DVW-790WSP Camcorder User Manual


 
Chapter 4 Adjustments and Settings for Recording4-122
4
5 To end reading data, push the MENU CANCEL/PRST/ITEM
switch to CANCEL/PRST.
To continue the reading of data, go on to step 6.
Notes
• The data and the card ID read from the card overwrite the data
stored in the camcorder. Before going on to step 6, re-check the
card ID and decide whether it is necessary to read the data and
card ID from the card.
• The card stores data for both user-mode settings and engineer-
mode settings. Both sets of data are read and written together.
For more information, refer to “maintenance manual.”
• There is no setup card read-write compatibility between different
models of digital camcorder. For example, a card written by the
DVW-707 cannot be read by the DVW-790WS or DVW-707P,
and vice versa.
6 Press the rotary encoder once more.
While data is being read, the message “READING DATA!” is
displayed.
When reading is completed, the message “READ : OK” appears.
E11*SETUP CARD E11*SETUP CARD
pREAD(READ(pCAM)CAM)
WRITE( WRITE(pCARD)CARD)
ID EDIT ID EDIT
WRITEWRITEPROTECTPROTECT:OFFOFF
WHITE DATA READ: OFF WHITE DATA READ: OFF
ID: ID:
READ? (Y:PRESS) READ? (Y:PRESS)