Filter
Top Products
Chapter 3 Recording and Playback3-6
3
OUTPUT/
DCC: CAM,
DCC ON
Zoom: Automatic
Iris: Automatic
DISPLAY: ON
AUDIO SELECT CH-
1/CH-2: AUTO
F-RUN/SET/R-RUN:
F-RUN or R-RUN
(set as needed)
3 Check that there are no obstructions near the cassette lid, then press
the EJECT button to open the cassette lid.
4 After checking the points below load the cassette, and close the
cassette lid.
• The cassette is not write-protected.
• There is no slack in the tape.
• The leader tape is wound on the take-up reel.
Basic procedure for shooting : from adjusting the
black balance and white balance to stopping recording
After turning on the power and loading a cassette, set the switches and
selectors as shown below and begin operation.
Switch and selector settings before shooting